Leica disto a3 инструкция на русском языке скачать

Leica Geosystems Leica DISTO A3 User Manual.

Another press turns it off again. Switching off the device (or automatic switch off) also turns off the light. The default reference setting is from the rear of the instrument. By pressing the. the setting can be changed, so that the next measurement taken will be from the "front" of the in- strument. Afterwards the reference setting automat- ically defaults back to rear.

See picture. Single Distance Measuring. DIST - key A, 1 > turns the laser on. Aim at. the desired target and press DIST - key.

The measured distance is displayed immediately in the chosen unit. This function allows the user to measure the minimum or maximum distance from a fixed measuring point as well as to determine spacing - see figure. E >. It is commonly used to measure diagonal. distances (maximum values) or horizontal distances (minimum values). Press and hold.

DIST - key A, 1 > until you hear a. beep, indicating the device is in a continuous measuring mode. Then slowly sweep the laser back and forth respectively up and down over the desired target point - see figure. F, G > - (e.g. a corner in the. DIST - key A, 1 > again and the continuous. measurement will be stopped. The current values for maximum and minimum distances are shown in the display as well as the last measured value in the main line. Take the first measurement, addition is executed by pressing the.

PLUS - key A, 2 > and subtraction by. MINUS - key A, 8 >, then take the next. measurement. This process can be repeated as many times as is required. The result is displayed in the main line, whilst the last measurement taken is also displayed. Pushing the.

CLEAR - key A, 5 > undoes the.